mining fiber optic cable
Found 356 Produtos
Cabos de fibra óptica UPC para FTTH OM3 2m 3m Quadro de distribuição de fibra de alta velocidade
Product profile An fiber pigtail is a cable with only one fiber connector; It is commonly used to connect to fiber optic devices. One side of the connector is mainly responsible for the connection, and the other side is fused with the optical fiber glass to achieve minimal insertion loss. We offer a full range of single mode and multi-mode fiber braids. Characteristic Low insertion loss, high return loss. Excellent mechanical durability. High reliability and stability. Good
Cable de fibra óptica GYXTW blindado para exteriores Modulo único 2-24 Construção de dutos G652D
Armored single tube single-sheathed/single-armored optical cable, the optical fiber is placed in a loose buffer tube. The cable core is protected by corrugated steel tape armouring and covered with a black polyethylene sheath. Two embedded steel wires provide the required tension. Product structure: Fiber: 2-24 fiber Single loose tube gel filling Armouring: corrugated steel tape Reinforcement: embedded steel wire Jacket: black UV and moisture resistant polyethylene (PE).
OPGW-48B1-100 118.8;66.2 Cableira de terra 48 72 288 Núcleo para infra-estruturas da Torre Comuni
Product Description: optical ground wire (also known as an OPGW or, in the IEEE standard, an optical fiber composite overhead ground wire) is a type of cable that is used in overhead power lines. Such cable combines the functions of grounding and telecommunications. An OPGW cable contains a tubular structure with one or more optical fibers in it, surrounded by layers of steel and aluminum wire. The OPGW cable is run between the tops of high-voltage electricity pylons. The
OPGW-48B1-100 118.8;66.2 Cableira de terra 48 72 288 Núcleo para infra-estruturas da Torre Comuni
Product Description: optical ground wire (also known as an OPGW or, in the IEEE standard, an optical fiber composite overhead ground wire) is a type of cable that is used in overhead power lines. Such cable combines the functions of grounding and telecommunications. An OPGW cable contains a tubular structure with one or more optical fibers in it, surrounded by layers of steel and aluminum wire. The OPGW cable is run between the tops of high-voltage electricity pylons. The
Cabos de Fibra Óptica Drop LSZH Jacket Outdoor GJYXFCH FTTH SM G652 1 núcleo 2 núcleos de rede de Internet fio de distribuição
FTTH Fiber Optic Drop Cable is directly connected to the home, and its bandwidth, wavelength and transmission technology type are not limited. At the center of the cable is the fiber unit, flanked by parallel strength members (steel wire or FRP). Steel wires are also used as additional strength and the cables are then completed with a black HDPE sheath or LSZH sheath. Characteristics Good mechanical and environmental characteristics Anti-ultraviolet properties meet the
GYFTY Cabos de fibra óptica blindados ao ar livre com FRP
GYFTY CABLE- Loose tube style, optical fiber cable with non-metallic central strength member of FRP and peripheral strength members with moisture barrier inner sheathed. Cable protected by a black PE oversheath, suitable for duct or aerial application. Tubes contain optical single-mode or multimode fibers colour color coding scheme. Applications -.Usable in Duct or Aerial -.Long-haul communication system -.Junction communication system -.Subscriber network systems -.Local
FTTX Cabo de queda FTTH para interiores e exteriores 1/2/4/6 núcleo single-mode multi-mode G657A
FTTx cables are suitable for installation indoors, attics, ducts, cable ducts and trays. It also allows extension between the building and the supports (up to 50 m in climate zone II). It is used in FTTx networks where minimum geometric dimensions of the jacket are required, while reliable protection of the fiber against climatic and mechanical influences must be ensured. The special round shape of the cable ensures minimal friction when laying the cable using the pull method
GJYXFCH FTTH Drop Cable Modo único G657A G652D Fibra 1 núcleo Casaco branco ou preto
Description FTTH cable is directly connected to the household, and its bandwidth, wavelength and transmission technology type are not limited. The fiber optic unit is located in the center. Two parallel stiffeners are placed on both sides. Steel wire is also used as an additional reinforcement, and the cable is then finished with a black HDPE sheath or LSZH sheath. Application Use outdoor horizontal and vertical distribution. Suitable for connection with communication devices
Retardante de chama MGTSV Cabo de fibra óptica 144 Núcleo SM Tubos soltos enrolados Blindados Comunicação entre escritórios de minas
MGTSV is suitable for coal, gold, iron ore and other mines. It has the flame retardant, rodent resistance property, so it is a good choice for mines. Especially for the accident-prone land mines, to ensure smooth communication, reduce losses when the accident happens. The steel armor helps to protect the cable from rat bite, ensures bullet proof ability. Double jackets structure have nice properties of moisture resistance and crush resistance. Besides, the out sheath is flame
GJYXFCH/GJYXCH cabo FTTH para exteriores Cabo de queda auto-sustentável
GJYXFCH leather cable is made by placing the optical communication unit in the center, placing two parallel non-metallic strengthening elements (FRP) on both sides, and adding a steel wire strengthening element on the outside, and finally extruding a black or colored low-smoke and halogen-free sheath cable. Self-Supporting DropCable Features: — Good mechanical and environmental performance; — Flame retardant (or non-flammable) performance meets the requirements of relevant
50 m de cabo de fibra de fibra ADSS com 16 núcleos com G657/Multi Mode
ADSS optical cable, the optical cable uses a loose tube wound on the central strengthening member (FRP or steel wire) to form a complete round optical cable core, and is twisted by a certain number of aramid yarns after being covered with a PE inner sheath. Finally, another layer of PE outer sheath is extruded. The loose tube of ADSS cable is made of high temperature resistant material. Place multiple suitable single-mode or multimode optical fibers and optical fiber moisture
OPGW Ground Wire Cable 36 48 72 144 288 Core For Tower 220KV Line Construction
Product Description: optical ground wire (also known as an OPGW or, in the IEEE standard, an optical fiber composite overhead ground wire) is a type of cable that is used in overhead power lines. Such cable combines the functions of grounding and telecommunications. An OPGW cable contains a tubular structure with one or more optical fibers in it, surrounded by layers of steel and aluminum wire. The OPGW cable is run between the tops of high-voltage electricity pylons. The
